Loading…
Product type
Medical face mask fabric is a specialized textile designed to provide protection against airborne particles and pathogens. It is typically made from non-woven polypropylene or other synthetic materials that are engineered to filter out contaminants while allowing for breathability. This fabric is essential in the production of medical masks used in healthcare settings and by the general public to reduce the transmission of infectious diseases.
| Material | Non-woven polypropylene or polyester |
| Fabric weight | 20 to 100 grams per square meter |
| Filtration efficiency | Up to 95% for bacterial filtration |
| Breathability | Measured in mm H2O/cm2, typically 5 to 30 |
| Width | Typically 160 to 180 cm |
When selecting medical face mask fabric, buyers should consider the material's filtration efficiency and breathability to ensure adequate protection and comfort. It's important to specify the desired fabric weight and width based on the intended use. Additionally, certifications such as ASTM or EN standards may be relevant for compliance in medical applications. Quantities should also be determined based on production needs.
Get quotes for Medical Face Mask Fabric
Tell us your requirement — quantity, specs and timeline — and our team sources verified manufacturers and brings you the best quote.
Surgical mask fabric typically has higher filtration efficiency and is made from non-woven materials, while cloth mask fabric is often woven and may not provide the same level of protection.
Medical face mask fabric is generally designed for single-use applications, but some treatments can allow for limited reuse under specific conditions.
Look for certifications such as ASTM F2100 or EN 14683, which indicate compliance with specific performance standards.
Yes, breathability is crucial for comfort, especially during extended wear, while still maintaining adequate filtration.
Medical face mask fabric typically weighs between 20 to 100 grams per square meter.
Request samples and specifications from suppliers to verify that the fabric meets your needs for filtration, weight, and compliance.